Our global A&D manufacturing partner is looking for a high horsepower Sr. Project Engineer to join their team. This position will be involved in technical design & support of legacy programs. This position is client facing with very high visibility within the organization. Preferred Qualifications below.

-AS9100 - GD&T - Hydraulic Design - Customer Facing in previous roles - Six Sigma - Material Review Board 

- BSME Required - Masters preferred 

​

Our global Defense partners are looking for Electronic Warfare Engineers to join their teams. This position has the ability to change the future of Defense.  You will be designing, reprogramming, maintaining,EWIRDB models to enhance highly complex weapon systems used to protect countries & nations. Preferred Qualifications below.

- 5+ years of EW design - 2+ year of Electro- optical system verification - MatLab - Python - Radar signal processing expsoure

- Engineering Degree required - Master/PhD preferred - Research a major plus 

Our global A&D manufacturing partners are looking for well versed Machinists to join their teams. The scope of these roles are to operate cutting machines, CNC machines, Lathe machines & curing machines or ovens. Preferred Qualifications below.

- 2+ years of machining in Aerospace manufacturing - Safety first mindset - Material selection understanding 

- Technical degree preferred 

​

Our global A&D manufacturing partners are looking for CMM Operators. This position will be involved in technical inspection with CMM machines. Utilizing VeriSurf or PC-DMIS on the programming side. These positions with high level of attention to detail. Preferred Qualifications below.

-AS9100 - PC-DMIS - VeriSurf - Faro & Bridge machines - 

- Technical degree preferred or 2+ years of experience 

​

Our global A&D manufacturing partner is looking for a high level Aerospace Systems Engineers. These positions focus on Fly-by-Wire, Stick to surface, & Flight Control systems used in both Government & Commercial applications. Preferred Qualifications below.

-10+ years in FBW, STS design experience - Matlab - Simulink - Closed/open loop control algos - Electro/Mechanical motion control

- BSME Required - Masters preferred - ability to obtain a DoD clearance 

​

Our global A&D manufacturing partner is looking for a Lead Software Engineer to join their team. This position will lead avonic & flight control software developments. The team of developers ranges from 6-11. This position needs to have strong leadership ability. Preferred Qualifications below.

- 10+ years leading software development teams - Matlab - Simulink - LabVIEW - dSpace - DOORS - C+ - DO-178C Process 

- BSME Required - Masters preferred 

​

Our global Aerospace structure manufacturing partner is looking for a HR Manager to join their team. This position will lead employee development, retention & a team of 8. The campus has 2 facilities and 950 employees. This position needs to have strong leadership ability. Preferred Qualifications below.

- 10+ years leading HR teams in a manufacturing environment - Talio - Key employee drive metrics knowledge 

- Bachelors degree - Masters preferred 

​

Our global A&D manufacturing partner is looking for a Operations Finance Manager to join their team. This position will lead revenue cycle studies, time studies. This position has potential for high growth. This position needs to have strong leadership ability. Preferred Qualifications below.

- 10+ years leading Finance teams in a manufacturing environment - Revenue Cycles - Cost Accounting 

- Bachelors degree in Accounting or Finance - Masters preferred 

​

Our global A&D manufacturing partner is looking for a Sr. Program Manager. This position will be involved in the day-to-day operations of the surface programs. This position will plan, coordinate, align & execute on high level complex surface systems. Preferred Qualifications below.

- 6+ years of PM experience - AS9100 - Customer Facing in previous roles - Six Sigma - Material Review Board - Experience leading $5-40M programs 

- BSME Required - Masters preferred 

​

Our global A&D manufacturing partner is looking for a Customer Program Manager. This position will be involved in the day-to-day operations of the surface programs. This position will plan, coordinate, align & execute on high level complex surface systems. Preferred Qualifications below.

- 6+ years of PM experience - AS9100 - Customer Facing in previous roles - Six Sigma - Material Review Board - Experience leading $10-25M programs 

- BSME Required - Masters preferred 

​

Our A&D structure manufacturing partner is looking for a Program Manager. This position will be involved in the day-to-day operations of the surface programs. This position will plan, coordinate, align & execute on high level complex structure systems. Preferred Qualifications below.

- 6+ years of PM experience - AS9100 - Customer Facing in previous roles - Six Sigma - Material Review Board - Experience leading $5-40M programs 

- BSME Required - Masters preferred 

​

Our global Aerospace manufacturing partner is looking for a Lean Expert to join their team. This position will be involved in process improvements, planning & integration of Lean activities. From front line to management this person will be in charge of Lean ops.  Preferred Qualifications below.

- 5+ years leading Lean activities - Lean Black Belt - SPC Data exposure - Machining practices exposure 

- BSME Required - Masters preferred 

​

Our global Defense manufacturing partner is looking for a Staff integration Engineer. This role will be incremental in the integration of electro-mechanical systems. This role will utilize experience in verification solutions for highly complex EMS subsurface systems. Preferred Qualifications below.

- 10+ years in system integration/ verification - GD&T - DOORS - Government agency business exposure - 

- BSME Required - Masters preferred - Active DoD clearance required 

​

Our global Defense manufacturing partner is looking for a Sr.Design Engineer on their Rocket Engine Team.  This position will be involved in the full product life cycle from business capture to product delivery. Applications are both mono-propellant & bi-propellant engines/propulsion systems. Applications will be used on strategic missile systems. Preferred Qualifications below.

- Thrust design experience range .02LBF to 600LBF - Exposure working with government agencies - Injector chamber design - Test Design exposure - 15+ years designing rocket propulsion systems 

- Engineering degree required - Masters preferred - Active security clearance required 

​

Our global Defense manufacturing partner is looking for a Director of Quality to lead their Quality department.  This position will oversee FAA certifications, AS9100, and a team of 30-40. This position reports directly to the business unit President.  Preferred Qualifications below.

- Experience leading quality teams of over 30 - AS9100 Expert - FAA Expert - Strong organizational leader - Systems quality 

- Engineering degree required - Masters preferred 

Our global Defense manufacturing partner is looking for a Sr. Systems Engineer on their Weapon System Team.  This position will be involved in the strategic R&D of future weapon systems. This role will define, integrate & test future weapon systems. 

Preferred Qualifications below.

- 10+ years designing weapon systems - high level of communication skills - MIL-STD-1760 weapon integration experience - Familiar with UAI - Matlab - Simulink - Stateflow 

- Engineering degree required - Masters preferred - Ability to obtain DoD security clearance  

​

Our global A&D manufacturing partner is looking for a Staff Test Engineer. This position will design, build & integrate test functions of highly complex space systems. This position will play a pivotal role in new product integration to legacy products. Preferred Qualifications below. 

- Complete understanding of aircraft surface system testing - Analytically focused - LabVIEW exposure -  NI TestStand exposure - Six Sigma 

- Engineering degree required - Masters preferred 

​

Our global A&D manufacturing partner is looking for a Quality Engineer. This position will oversee program quality & the delivery of products to both government & commercial clients. Programs on hand are F-35, B-1, F-18, Rotocraft, and F-16.  Preferred Qualifications below. 

- 3+ years of AS9100 - SPC exposure - Six Sigma exposure - Root Cause exposure 

- Engineering degree required - Masters preferred 

​

Our A&D structure manufacturing partner is looking for a Quality Engineer. This position will oversee program quality & the delivery of products to both government & commercial clients. Preferred Qualifications below. 

- 3+ years of AS9100 - QM Certification - Six Sigma exposure - Root Cause exposure - MRB Ticket exposure 

- Engineering degree required - Masters preferred 

​

Our global A&D manufacturing partner is looking a Staff Systems Engineer. This position will be involved with the design, layout & architecture of aircraft systems. This position will work with a very low level of supervision. Preferred Qualifications below.

- 10+ years designing highly complex aircraft systems - DFSS knowledge - Excellent problem solving skills - Knowledge of WISE/SAP applications - Six Sigma 

Engineering degree required- Master/PhD preferred 

​

Our global A&D manufacturing partner is looking for their next Engineering leader. The Director of Engineering will oversee 40-50 engineers on the design & testing of their new space systems. Preferred Qualification below.

- 5-10 years leading large teams of engineers - P&L experience of 200M - 15+ years designing/testing space systems - Lean Black Belt 

- Engineering degree required- Masters/PhD highly preferred 

Our global Defense manufacturing partner is looking for their next engineering leader. This position will over see their entire tech facility, 30-35 engineers, & 6-8 contract engineers. This position reports directly to the VP of Engineering. Preferred Qualifications below.

- 5+ years leading a large team of engineers - Experience building highly functional design teams - Experience working with government agencies 

- Engineering degree required- Masters/PhD highly preferred - Active security clearance required 

Our global A&D manufacturing partner is looking for a Staff Operations Engineer. This position with align internal & external process validation, part transition & process control. Preferred qualifications below. 

- 10+ years of design & support of high complexity manufacturing systems - Leading $15-20M capital improvement projects - Lean Black Belt - Advanced knowledge of DFMA 

- Engineering degree required - Masters/PhD preferred 

Our global A&D manufacturing partners are always looking to utilize subject matter experts. Subject matter expert in one of the following verticals? Please Apply. 

- Composites                     - Hydraulic Systems                            - Actuation Systems                              - Weapon Systems 

- CMM technologies          - NDT                                                    - Supply Chain Integration                    - Software Systems  

- Avionics                            -  RF Engineering                                 - EWF Engineering                                 - Propulsion Systems 

- Satellite Solutions            - Program Management                     - Cyber Security                                     - Aero Structures 

- Quality 

​

​